| Picture |
Heading |
Updated |
 |
Bright Annealed Stainless Steel Tube
Out Diameter and Inside Diameter Tolerance / WT Tolerance : ±0.08mm/ or as per production standard, or up to your required. Length Tolerance：-0/+6mm；Straightness:：Max.0.15mm/m；Concentricity: ±0.015mm； |
2023-11-16 |
 |
Stainless Steel Tubing
​Heat Treatment：Bright Annealing/ Annealing and Pickling；Tubes Cleaning: Pickling or Ultrasonic cleaning with independent intellectual property rights to ensure stainless steel tubing inside and outside cleanliness. |
2023-09-30 |
 |
304 Stainless Steel Tubing
Heat Treatment process：By Bright Annealing or Annealing and Pickling；7.Tubes Cleaning: Pickling or Ultrasonic cleaning with independent intellectual property rights to ensure 304 stainless steel tubing outside and inside surface cleanliness. |
2023-07-19 |
 |
316l Stainless Steel Tubing
Heat Treatment：Bright Annealing/ Annealing and Pickling；Tubes Cleaning: Pickling or Ultrasonic cleaning with independent intellectual property rights to ensure 316L stainless steel tubing inside and outside cleanliness. |
2023-06-08 |
 |
Stainless Steel Exhaust Tube
Out Diameter and Inside Diameter Tolerance / WT Tolerance : ±0.08mm/ or as per production standard, or up to your required.Length Tolerance：-0/+6mm；Straightness:：Max.0.15mm/m；Concentricity: ±0.015mm； |
2023-05-29 |
 |
304 Stainless Steel Tubing
Heat Treatment process：By Bright Annealing or Annealing and Pickling；7.Tubes Cleaning: Pickling or Ultrasonic cleaning with independent intellectual property rights to ensure 304 stainless steel tubing outside and inside surface cleanliness. |
2022-08-22 |
 |
316l Stainless Steel Tubing
Heat Treatment：Bright Annealing/ Annealing and Pickling；Tubes Cleaning: Pickling or Ultrasonic cleaning with independent intellectual property rights to ensure 316L stainless steel tubing inside and outside cleanliness. |
2022-07-30 |
 |
Stainless Steel Exhaust Tube
Out Diameter and Inside Diameter Tolerance / WT Tolerance : ±0.08mm/ or as per production standard, or up to your required.Length Tolerance：-0/+6mm；Straightness:：Max.0.15mm/m；Concentricity: ±0.015mm； |
2022-05-31 |
Friends links